- amiga history guide Supporting Amiga and compatibles since 1997 -
- banners - disclaimer - faq
- - -
- -     -
recent updates
amiga history
amiga models
internet links



© 1997-2006
Gareth Knight
All Rights reserved



Beginners guide to Amiga floppy disks

The mysterious Amiga disk

For many new users the Amiga floppy drive can be a source of confusion. In this short article I intend to describe the main features of this device and some problems that may occur.

The Amiga disk drive is a unique and versatile beast that represents the best of 1980s technology. Unlike modern PC drives, the Amiga is constantly monitoring changes in the drive state and can use a maximum of 4 disk drives at any one time. This allows the Amiga to immediately recognize when a disk has been inserted, without the need for manual clicking on the 'retry' button. However, this capability comes at a price - a constant clicking that becomes an irritant to most Amiga users, before being mentally blocked out. Fortunately there is a solution to this problem. Several utilities, such as the popular MCP commodity (available on Aminet), will repress the clicking sound.

The majority of Amigas come with a double density 3.5-inch disk drive (also known as low density). These drive have a maximum capacity of 880k using the standard FFS (Fast FileSystem). Older machines, such as the A1000 & A500 have a storage limit of 837k. Although these machines can read 880k disks with a device handler (a small file that allows the Amiga to understand the disk), they cannot boot from them when you switch on your computer. Device handlers also allow the user to read PC disks. Popular varieties include CrossDOS & MessyDOS that provide custom device handlers and simple text conversion utilities. However, these utilities cannot perform miracles, limiting the type of disk you can read to the 720k PC variety.

So-called 'Big Box' Amigas, such as the A3000 & A4000 are equipped with a high-density floppy drive that can store 1.76Mb. Unfortunately the drive speed remains the same, so disk reading is quite slow in comparison to standard PC drives. In many cases they are referred to as 'half-speed' HD drives. However, they do allow the reading of 1.44MB disks through CrossDOS, allowing the transparent use of standard PC & Mac disks. This functionality can be particularly useful for emulation or swapping files between machines.

Why do my disks become corrupted?

The major causes of corrupt disks are:

  • the use of cheap disks,
  • removing a disk while the Amiga is writing to it,
  • placing the disk near a magnet field such as speakers, televisions, or by a radiator, etc.

I want a high-density disk drive for my A1200! What can I do?

There are two options available.

  1. The first and oldest option is to purchase an external 1.76Mb floppy drive, such as the XL drive from Power Computing. These drives are slow and costly (£70), but may appeal to die-hard Amiga owners who hate all PC manufacturers. Not recommended.
  2. The second option is to purchase a Catweasel. This device can be fitted to your IDE, Zorro, or PCI connector, allowing the use of standard high-density PC drives. They are also considerably faster and cheaper than the first option. Depending upon the type of interface required, these devices retail for £40+. This also provides the ability to read 400 & 800k Mac disks, as well as a range of obscure formats.

I want to read Amiga disks on my PC! What can I do?

Until recently the options have been severely limited. The ISA version of the Catweazel provided a hardware solution, but was difficult to find and limited to older machines with a spare ISA slot. Similarly, the software-based Disk2FDI provided limited support, but required two disk drives. Fortunately, it has recently been announced that a new version of the Catweazel will be released that will connect to the Zorro, PCI and A1200 clock header. For just over £50, this promises to banish disk reading problems, providing Amithlon/Pegasos/AmigaOne users with a method of reading their old Amiga disks.

Catweazel PCI Mark 3

I have an Amiga emulator on the PC. How can I transfer my Amiga disks?

Amiga emulators avoid the disk problem by using disk images. The first version of UAE established .ADF (Amiga Disk Format) as the standard format for emulation, but it is also common to find ADZ images (ADF files that have been compressed using the Zip format) and DMS (the original Amiga disk storage format). Modern versions of UAE offer support for these formats, while real Amiga can utilize freeware utilities to unpack them. To copy Amiga disks you will need to create a disk image, using TransADF or similar utility, and copy it to disk. The copying part will be the most difficult. ADF files usually weigh in at 900k - too large for a double density disk. It will therefore be necessary to attempt to compress the disk image using LHA/Zip or setup a slow network connected via the serial port.

For more information on some of the products mentioned in this article consult the following articles:

Cloanto's guide to reading Amiga disks
Disk2FDI Homepage
Individual Computer - the people behind the Catweazel
Linux Catweazel ISA software
E-Trade guide to the Catweazel


Last Update: 15/12/2002


Latest updates to the Amiga History Guide. (more)

· Amiga Hardware
· Amiga History.de
· Amiga Magazine Rack
· Amiga-news(en)(de)
· Amiga.org
· Amiga World
· AmigaOS 4.0
· Amiga University
· Commodore Retrobits
· Dave Haynie archive
· Lemon Amiga
· MorphOS Support
· morphos-news.de


Other interesting items in the archive!



home · changes · amiga history · features · amiga models
magazines · technical · interviews · internet links · downloads

Hosted by:
Bambi - The Amiga Web Server